2x saddlebags + 2x crash bars XL compatible with Yamaha Tenere 700 19-24

Set consisting of saddlebags for the right and left side (pair). rear bag. side carrier + crash bar. engine protection below. protection bar for the top cover (for the right and left side). mounting material
Bagtecs luggage set consisting of side bags. pannier racks and tail bag
Drybag bags made of tarpaulin. waterproof. hard-wearing. UV-resistant and easy to clean
All seams are heat-sealed for maximum moisture protection
The roll-top closure reliably prevents water from getting in. even on long journeys in heavy rain
Opening the motorcycle bags over the entire width enables the bag to be conveniently loaded from above
Reflective elements for better visibility as a safety plus
Bags can be folded when empty. so they can be easily stowed away outside the motorcycle
Saddlebags for right and left side with 2x 30 liters volume
The bags are attached to the carrier using straps with loops. which are attached to the bags with clip fasteners
Stabilizes its shape even when partially loaded thanks to plastic reinforcement in the bottom and in the rear wall
Total volume 60 liters (30 liters per bag)
Dimensions: width 17.72 inches. height 13.78 inches. depth 7.87 inches
Motorcycle drybag tail bag for the passenger seat or luggage rack with a capacity of 60 liters
The bag is fixed using 4 straps with loops. which are attached to the bag with clip fasteners
Secure and easy attachment of the tail bag without loose elastic straps or straps
Clip adapter allows attachment of additional Bagtecs bags to expand the volume
Shoulder strap for easy transport of the bag outside the motorcycle
Dimensions: width 25.59 inches. height 13.78 inches. Depth 13.39 inches
Bagtecs pannier rack SLP for motorcycle side cases and saddlebags
Perfectly adapted to the respective model for optimal function and a slim silhouette
Double function:
As a saddlebag holder for attaching or securely using side bags or saddlebags
As a case carrier for mounting aluminum cases from Bagtecs or other brands
Made from Resistant steel with a thickness of 0.16 inches
Important: Only suitable with standard engine protection. not suitable when installing Yamaha Rally engine protection or parts from other manufacturers
Attention: Due to lack of space. the engine crash bars cannot be installed in conjunction with the OEM front spoiler/underbody protection. These must be permanently removed for installation
Set consisting of lower engine protection bar and upper fairing protection bar
Motorcycle crash bars as optimal protection for driver and machine in the event of a tipping over and falls
Reliably prevent or reduce damage to the engine and can prevent expensive repairs
Protection also for parts located further up. such as fairing. tank or add-on parts
Made of extremely stable steel tube with a diameter of 1.1 inches and 0.87 inches
Mounting points of the protective bars are selected in such a way that the impact energy is optimally distributed and selectively high loads are avoided
Freedom from leaning is fully maintained
Optimally adapted to the motorcycle. perfect fall protection in combination with an off-road look
Bent on the most modern CNC bending machines for absolute accuracy of fit
Double powder coating for optimal rust protection: First layer with zinc primer. second layer orange for a flawless surface
Crash bars / crash pads do not need to be registered
Scope of delivery: Saddlebags for the right and left side (pair). rear bag. side carrier. crash bar. engine protection below. protective bar. cladding above (for right and left page). mounting material